Video 12 – LUXFEEL Loose Lay DIY Series – Ramping Part 3: Scraping

Video 12 – LUXFEEL Loose Lay DIY Series – Ramping Part 3: Scraping

LUXFEEL Loose Lay DIY Series – Ramping Part 3: Scraping – Video 12

In the previous video of the Luxfeel DIY series, Joshua showed you the second step of ramping, ‘layering the mortar;. In this video below, Joshua shows you the third step, ‘scraping’.

If you have any questions please call our office on 07 5539 6260 we are happy to help!

LUXFEEL Loose Lay DIY Series – Ramping Part 3: Scraping – Video 12

The Process:

Step 1: Check the consistency is right by dabbing the mortar with your finger. You’re wanting to see if it is around 50% dry, leaving a small amount on your finger at which point it is ready to scrap.

Step 2: Grab your trough and use the back of it to scrap downwards from high to low, removing any uneven high points in the mortar.

Follow our DIY video series to find out from the professionals – how to install your own loose lay vinyl planks!