Our Timber Collection
CLIC Oak is a new range of engineered timber flooring, that is easy to install and suitable for DIY installations, it is durable and stylish.
The new range CLIC Oak has been created to compliment a large variety of interior styles and decor. The range has distinctive knots, grain and texture on the surface, combined with high quality materials that create the multi-layer boards.
The new features of the range recreate the beautiful natural elements of a true solid Oak timber floor with the added strength and durability that comes with the engineered production.
Our new CLIC Oak range features a 5G glueless joining system, which is based on a single action method of flooring installation. Easy as one, two, CLIC!
CLIC Oak Specifications
Species: European Oak
Colour Stains: Vintage, Smouldered, Whitewash, Monaco, Slate Grey, Natural
Core Material: Hevea
Locking System: Valinge 5G Glueless joining system
Profile: Micro bevel 4 sides
Size: 185mm x 13.5mm
Wear Layer: 4mm lamella (nominal)
Length: 1,820mm & 2,130mm
Surface: Medium wire brushed texture
Coating: UV-cured 6 coats of Klumpp Coating
Finish: Matt (10% gloss)
Coverage: 1820mm – 2.020M2/box & 2130mm – 2.364M2/box
Packaging: 6 rows per box, maximum of 2 nested rows
Install Suitability: Floating or direct glued
Install Sub-Floor Heating: Yes
Install Over: Wood, concrete, plywood & plywood over concrete
Colour Match Accessories: Aluminium trims & MDF wrapped scotia
WATCH – The below video shows how the Valinge 5G technology works with wood flooring.
How to maintain your engineered timber flooring?
Here we offer a few tips on caring for your engineered timber flooring. Our installation guides offer detailed care and maintenance recommendations for each timber flooring ranges, as well as repair instructions and solutions to remove stains.
- Use doormats outside each entrance to your home to prevent dirt, sand, grit and other substances from being tracked onto your floor. Use nonstaining mats on your floor. Do not put rubber-backed, latex-backed or coco fibre mats on your floor because they could stain or damage the surface.
- Close your curtains or blinds where extreme sunlight hits the floor. A combination of heat and sunlight causes most home furnishings to fade or discolour and will do the same to your floor.
- High heels and shoes with gravel and grit stuck on them can damage any floor. We suggest using rugs and runners in high traffic areas. Remember to shake out rugs and vacuum regularly. Your fury friends can also scratch your floors, so be sure to have your dogs and cats toenails clipped.
- Changes in humidity can cause floors to move, cup, crown or peak because of expansion and contraction created by extreme wet or dry conditions. Protect your floor by controlling the room temperature with a heating or cooling system. Suggested temperatures of 18-25°C with relative humidity levels between 30% – 70%.
- Support furniture with wide-bearing, non-staining floor protectors. Ideally, the protectors should be at least 25mm (or 2.5cm) in diameter, made of non-pigmented hard plastic, and rest flat on the floor. Nonstaining felt protectors are also acceptable. Casters (type W), felt pads or floor protectors are recommended for all movable furniture. Use protection mats under chairs with caster in order to avoid abrasion.
- If you need to move heavy furniture and/or appliances across the floor, always use strips of wood or hardboard runways to protect the floor. Always use runways, even if you have an appliance dolly or even if the heavy objects are equipped with wheels or rollers.
- Sweep or vacuum your flooring regularly (refer to the maintenance section of the installation guide on recommended cleaning techniques and products). Prevent stains by wiping up spills promptly.