LUXFEEL Loose Lay DIY Series – Ramping Part 3: Scraping – Video 12

LUXFEEL Loose Lay DIY Series – Ramping Part 3: Scraping – Video 12

LUXFEEL Loose Lay DIY Series – Ramping Part 3: Scraping – Video 12

In the previous video of the Luxfeel DIY series, Joshua showed you the second step of ramping, ‘layering the mortar;. In this video below, Joshua shows you the third step, ‘scraping’.

If you have any questions please call our office on 07 5539 6260 we are happy to help!

LUXFEEL Loose Lay DIY Series – Ramping Part 3: Scraping – Video 12

The Process:

Step 1: Check the consistency is right by dabbing the mortar with your finger. You’re wanting to see if it is around 50% dry, leaving a small amount on your finger at which point it is ready to scrap.

Step 2: Grab your trough and use the back of it to scrap downwards from high to low, removing any uneven high points in the mortar.

 

Follow our DIY video series to find out from the professionals – how to install your own loose lay vinyl planks! 

Tools you need to install loose lay planks:

– Stanley knife 
– Water based pressure sensitive adhesive 
– 2 hands or more, get your friends to help 
– Time 
– A photo camera – to show us your stunning brand new floors!  

If you need advice in choosing the best flooring for your home, please call our friendly staff members on 07 5539 6260!

Website: http://www.evolvedfloors.com.au

 www.luxfeel.com.au

Facebook: https://www.facebook.com/EvolvedFloorsGoldCoast

Instagram: http://instagram.com/evolvedfloors

Twitter: http://twitter.com/ELFfloors

LinkedIn: http://www.linkedin.com/company/evolved-floors

Follow us on Instagram @evolvedfloors http://instagram.com/evolvedfloors

We are on Pinterest too! http://www.pinterest.com/ELFloors/

Address: Unit 4, 6-8 Enterprise street
Molendinar, QLD 4214
Ph: 07 5539 6260
Email: info@elfloors.com.au

Enjoy the video!

Evolved Floors